Module Informations

The Alarm Distribution Analysis feature provides a duration-based or count-based alarm distribution.

The Heat Map Analysis illustrates how your data changed at the desired time breakdowns in the selected time intervals by colour-coding your data.

With the “Reactive Consumption Analysis”, users can see whether they exceed Capacitive and Inductive Energy limits.

The Actual vs Reference Comparison shows the comparison between the reference energy consumption and the actual energy consumption.

Energy Use by Time Periods enables users to examine energy use and cost in various time periods

The Energy Use Groups Breakdown groups the total consumption or electricity cost data according to the selected consumption group.

Energy Performance Summary illustrates the results of your energy savings by providing information such as Energy Saving Ratio, Saved Trees, Total Energy Saving.

Nonoperating Consumption Trend shows the trend of electricity usage or associated costs at nonoperating and operating hours of a site, meter, sub-meter, device, or portfolio.

The Portfolio Energy Performance Report module provides information on the energy performance of the and enables users to make comparisons in the table.

Saving Tips shows the energy efficiency recommendations defined in the system as notifications.

The "Best N Worst N Card" module sorts the desired number of points according to the specified parameters as the best or the worst. 

Consumption Benchmarking by Time Period shows the selected data type

The Category Breakdown Benchmarking module provides a visualisation of aggregated energy consumption

Consumption Change by Reference shows the ratio of the current consumption with respect to the reference chosen. This feature can be used in any time period you can use.

The Consumption Benchmarking by Time Period module provides visualisation of aggregated energy consumption on various time periods.

Time Breakdown Benchmarking enables users to examine energy use and cost in various periods, for example, according to operation schedules, shifts, time-of-use tariffs, etc.

The Benchmarking Electricity Cost Savings By Tariff module reports and benchmarks cost savings by comparing the costs of multiple sites in a portfolio against another alternative energy tariff.

Bill Entry & Validation module verifies the total bill amount and compares calculated cost and/or measured consumption from the given meter.

The Electricity Tariff Comparison module calculates the electricity cost savings after switching alternative electricity tariffs.

Unit Price Comparison module provides a comparison of unit prices of various tariffs defined to the tenant.

It yearly enables users to analyse and report month-by-month energy consumption and cost.

Active Power Trend (APT) module allows users to monitor consumption in desired time periods.

Manual Data Entry allows users to enter any type of data that can be added to the addressed division.

The Map module helps users to see where their buildings are located.

Text Box module provides users to leave comments or notes for dashboards or modules.

Electricity Consumption & Generation Comparison illustrates how much your electricity consumption is covered by generation plants.

The “Electricity Production Detail” shows users how much energy is saved by using renewable energy compared to non-renewable energy use.

Electricity Generation Trend illustrates how energy generation changes in selected time intervals.

The Generation Summary shows the monitoring of production, savings and environmental benefits for solar systems from the day it was installed.

Generation Trend Comparison illustrates 2 different generation trends

The Generation details table illustrates parameters (such as generation rate, performance …etc)

Generation by Plant Type Breakdown illustrates users' generation data and the ratio of each type of generation. Each generation plant percentage shows the contribution of the selected plant.

The Generation Benchmarking Analysis module helps to analyse multiple electricity-generating PV panels at the same time.

The “Instant Generation Details” module provides users with live information about electricity generation characteristics. 

The battery Monitoring Module will enable facility managers to track all energy transactions and conditions of their storage system. Thanks to the module, important battery parameters such as Battery state of Charge (SOC), Battery Voltage and imported/exported energy values may be monitored.

The “E-scooter Activity Tracking Table” gives general information about scooters.

The Consumption Target Tracker module calculates the expected energy consumptions and costs, compares these values with the targeted values, and shows the user the deviation for the selected time period and points.

“Generator Status Monitoring” provides live information to users about the general status of generating generators.

The Generator Operation Report module demonstrates electricity generation, run hours of each generator separately and their total amounts

Generator Portfolio Status (GPS) module allows the users to monitor all of the generator assets' collected data in one table, with respect to data collection frequency.

The Indoor Air Quality Monitoring module allows users to monitor parameters which are alarm status, temperature & humidity measurements, and VOC to identify abnormal HVAC operations and detect possible risk factors for a healthy indoor environment.

The Power Quality module visualises the time series trend of multiple power parameters

Reactive Panel Monitoring enables facility managers to track the current status of their compensation panel.

The Total Consumption demonstrates the total consumption values of certain data types in a selected time interval.

The Total Energy Usage shows total energy consumption and the distribution of energy sources.

UPS Portfolio Management demonstrates real-time condition parameters and statuses of data sources.

The reactive tracking module helps you to monitor reactive consumptions and detect penalties by color-coding your data.

The "Monthly Consumption Table" allows users to analyse and report monthly energy consumption.